Skip to main content
How to make Punchlists with Bulldozair ?

Doing any visit that detects anomalies on a plan.

Djouher Mezahem avatar
Written by Djouher Mezahem
Updated over a week ago

🚨 Important Notice 🚨

Make sure to synchronise your mobile application Bulldozair (Phones and tablets) with the correct project before visiting the field,

This step is very important, because it allows you to have access to all the details in your project !

⚡️ To simplify the procedure in 5 easy steps ⚡️

1️⃣ Choose and open your Plan

2️⃣ Place your Task in the requested Position 📍

3️⃣ Take your Photos 📷

4️⃣ Assign your Tasks to others 👉

5️⃣ Give a Title to your Task ✏️


Using Bulldozair on field

  1. 🗺 Once on field, open your project on the Bulldozair app from your mobile/tablet and click the tab Plans

    Open the plan of your visit:

  2. 📍 You can zoom for a better view, then drag and drop the pince in the exact position

  3. 📷. Take a picture, add a drawing then Save.

  4. 👉 Assign the Task to the right company/contractor.

    If your list is empty❓, you can Skip it for now then set it up later.

  5. ✏️ Tap, dictate or choose the Task's Title from the Dropdown List

💡 Extra Tips 💡

  • The Dropdown List is normally empty by default; Each time you create a Task, the title will be automatically added allowing you to use the previous one.

  • to go Faster, it is possible to customize the dropdown list according to the contractor chosen in the previous step.

🎉 Perfect Job ! Now your Task is perfectly created and saved 🎉

🔁 Keep going with your field visit, and create the next Task with the same steps.

After the site visit

  1. 🌐 Connect to a good Wi-fi and press the Sync Tab to save your work


Complete Video

Did this answer your question?